Flasher STM8

Flash programmer for STM8 series of flash microcontrollers with on-chip flash

Features

All STM8 devices can be programmed

Integrated optical isolation between host and target system

Standard 4-pin SWIM connector

USB 2.0 interface

Full duplex 100Mbit Ethernet interface

Target voltage can be measured & monitored during program

Fully plug and play compatible

USB, Ethernet, RS232 and 4-pin ribbon cable included

Windows PC software included

Target power supply via pin 1 of the 4-pin interface (up to 300mA to target with overload protection)

Specifications

General
Supported OS	Microsoft Windows 2000 Microsoft Windows XP Microsoft Windows XP x64 Microsoft Windows 2003 Microsoft Windows 2003 x64 Microsoft Windows Vista Microsoft Windows Vista x64 Windows 7 Windows 7 x64
Electromagnetic compatibility (EMC)	EN 55022, EN 55024
Operating temperature	+5°C ... +60°C
Storage temperature	-20°C ... +65 °C
Relative humidity (non-condensing)	Max. 90% rH
Size (without cables)	121mm x 66mm x 30mm
Weight (without cables)	122g
Mechanical
USB interface	USB 2.0, full speed
Ethernet interface	100Mbit, full duplex
RS232 Host interface	RS232 9-pin
Target interface	SWIM 4-pin connector
SWIM interface, Electrical
Power supply	USB powered, 100mA for Flasher STM8. 500mA if target is powered by Flasher STM8.
Target interface voltage (VIF)	1.2V ... 5V
Target supply voltage	4.5V ... 5V (if powered with 5V on USB)
Target supply current	Max. 300mA
LOW level input voltage (VIL)	Max. 40% of VIF
HIGH level input voltage (VIH)	Min. 60% of VIF