SEGGER - J-Link Pro

J-Link Pro

J-Link Pro is a refined version of the regular J-Link. It has an Ethernet interface in addition to the USB interface, as well as two additional LEDs which are used as hardware status indicators.

It connects via Ethernet or USB to the Windows (2000/XP/Vista) PC host.

J-Link Pro is fully compatible with J-Link and can be used "out-of-the-box". J-Link Pro uses DHCP per default. The built-in webserver makes manual configuration easy and convenient. Ethernet allows using the emulator far away from the PC in a development or production environment; download and debugging speed is higher and Ethernet provides electrical isolation from the PC.

All features of the regular J-Link also apply to this product.

Features

Fully compatible to J-Link

Ethernet interface

USB 2.0 interface

Any ARM 7/9/11, Cortex-M3 core supported, including thumb mode

Additional LEDs for power and RESET indication

Comes with web interface for easy TCP/IP configuration (built-in webserver)

Serial Wire Debug (SWD) supported

Serial Wire Viewer (SWV) supported

Automatic core recognition

Maximum JTAG speed 12 MHz

Download speed up to 720 Kbytes/second

Seamless integration into the IAR Embedded Workbench IDE

Powered through USB or power supply which comes with J-Link Pro

Support for adaptive clocking

All JTAG signals can be monitored, target voltage can be measured

Support for multiple devices

Fully plug and play compatible

Standard 20-pin JTAG connector

Wide target voltage range: 1.2V - 3.3V, 5V tolerant

USB and 20-pin ribbon cable included

Memory viewer (J-Mem) included

Comes with licenses for: J-Link RDI, J-Link Flash Breakpoints, J-Link GDB Server, J-Flash

Software Developer Kit (SDK) available

Embedded Trace Buffer (ETB) support

14-pin JTAG adapter available

Galvanic isolation from host system via Ethernet

Optical isolation adapter available

Target power supply: J-Link can supply up to 300 mA to target with overload protection.

Coming soon: firmware extensions (ARM11, X-Scale, Cortex R4 / A8 / A9), built-in GDB Server

Licensing

J-Link Pro comes with licenses for all J-Link related SEGGER software products: J-Link Flash Breakpoints, J-Link RDI, J-Flash, J-Link GDB Server,, providing the optimum debugging solution for professional developers. J-Link Pro can be used with almost all ARM debuggers, enabling download to flash memory with an unlimited number of breakpoints when debugging programs located in flash memory of most popular ARM microcontrollers. It also comes with the license to use J-Flash, SEGGER´s popular flash programming software.

Why Pro?

There are many aspects which make the J-Link Pro very attractive to use:

Price: Buying a J-Link Pro, which comes with licenses for all J-Link-related SEGGER software, will save you a lot of money because buying a J-Link and all licenses separate is more expensive.
Speed: J-Link Pro via TCP/IP provides higher download speed than J-Link via USB.
Usability: J-Link Pro can be used "out-of-the-box". A built-in J-Link GDB Server is planned to be implemented in the near future.
Flexibility: Due to the Ethernet interface, long distances between the development PC and the target system are possible. You can set a default gateway for J-Link Pro, so it is also possible to use it in large intranets.
Security: When using J-Link Pro via Ethernet, galvanic isolation of the development PC and the target system is supported.
Ready future use: J-Link Pro provides more memory for future firmware extensions (e.g. ARM11, X-Scale, Cortex R4 and Cortex A8).

For more information please contact the MicroWay sales team:

Head Office
MicroWay Pty Ltd
PO Box 84,
Braeside, Victoria, 3195, Australia
Ph: 1300 553 313
Fax: 1300 132 709
email: sales@microway.com.au
ABN: 56 129 024 825

Sydney Sales Office
MicroWay Pty Ltd
PO Box 1733,
Crows Nest, NSW 1585, Australia
Tel: 1300 553 313
Fax: 1300 132 709
email: sales@microway.com.au
ABN: 56 129 024 825

New Zealand Sales Office
MicroWay Pty Ltd (NZ)
PO Box 912026
Victoria Street West
Auckland 1142, New Zealand
Tel: 0800 450 168
email: sales@microway.co.nz

International: call +61 3 9580 1333, fax +61 3 9580 8995